Microwave Commercial Sterilization Machine Energy Saving For Medicinal Materials

Industrial Energy Saving Microwave Medicinal Materials Sterilizer Machine

Scope of application:

Microwave Sterilizer Equipment can be used for drying and sterilizing medicinal materials and pills, drying, sterilizing and heating materials such as strips, blocks, granules, loose powders and filter cakes with high water content and certain viscosity, and sterilization of medicinal liquids. , sterilization before and after packaging. It solves the problems that are difficult to overcome by traditional processes. It heats up quickly, processes materials quickly, and improves work efficiency; it realizes low-temperature sterilization without damaging the active ingredients of medicine; it can be heated through packaging to improve product quality: no waste water or waste gas is generated, waste residue, environmental protection and energy saving.

Theory of Microwave Sterilization Equipment

Microwave sterilization is the result of the combined effect of the thermal effect and biological effect of the electromagnetic field. The thermal effect of microwave on bacteria is to change the protein, so that the bacteria lose the conditions for nutrition, reproduction and survival and die.

The biological effect of microwave on bacteria is that the microwave electric field changes the potential distribution of the cell membrane section, affects the concentration of electrons and ions around the cell membrane, and thus changes the permeability of the cell membrane. Therefore, the bacteria are malnourished, unable to metabolize normally, the cell structure and function are disordered, and growth and development are inhibited. And death.

A large number of facts show that the drying and sterilization of Chinese medicinal materials by microwave is much better than the traditional high-temperature drying and sterilization process. The microwave drying and sterilizing machine for Chinese medicinal materials uses the electromagnetic induction of microwaves to heat and dry the materials. Different from other external heating drying methods, this drying method is to heat uniformly from the outside and inside of the material at the same time. Therefore, this drying treatment method has a short time and will not be deteriorated or coked due to overheating. The quality of the dried products is good. The drying effect of heat-sensitive Chinese medicinal materials is satisfactory.

Features of Microwave Sterilization Machine

The latest microwave drying and sterilizing machine for Chinese medicinal materials is a conveyor belt continuous dryer with multiple drying chambers, each with a microwavesource, make the microwave field radiate evenly in the room, and at the same time there is a dehumidification device, and multiple exhaust pipes are collected together to dehumidify. In a separate console, various process parameters can be set, and there is a long resister to prevent microwave leakage. There are observation doors on the side of each drying chamber. The main features of the machine are as follows:

1. Microwave sterilization is the direct interaction of microwave energy with microorganisms such as food and its bacteria. The thermal effect and non-thermal effect work together to achieve rapid heating and sterilization, and the processing time is greatly shortened. The sterilization effect of various materials is generally 3-5 minutes.

2. Due to the penetrating effect of microwaves, when the food is processed as a whole, both the surface and the interior are affected at the same time, so the disinfection and sterilization are uniform and thorough.​

3. Compared with the existing equipment, the composite structure can save 10%~20% energy.

4. The temperature of the outer surface of the furnace is low, and the operating environment of the workers is good, which is both energy-saving and environmentally friendly.

Technical Specifications

Equipment production steps

Payment terms:

T/T, L/C or other formal import and export payment method

Packing and Shipping:

1. Plastic film as inner packaging

2. Formal export packaging or packaging according to customer requirements

3. Shipping by sea, land or rail.

Choose the best shipping method according to the actual situation or customer requirements

FAQ

Q: How long is your production cycle?

A: Usually 7-25 working days, depending on the quantity.

Q: Can you help design the entire process line?

A: Of course, our experienced engineers and technicians can help you arrange the layout and installation of the entire production line according to the actual situation such as your workshop layout.

Q: How to install?

A: Due to the epidemic, we can currently provide online guidance services by experienced engineers.

Q: How is the payment:

A: T/T, L/C or other formal import and export payment method

Q: How long is your warranty period?

A: One year after commissioning is completed.

Q: Will you help us if we have any problems in future production?

A: It is necessary, you can contact me through mobile phone, WhatsApp, etc. We are always at your service. We will help resolve your issue as soon as possible.